BOVIAR T-TEST K12, User Manual, Page: 25 / 31

User manual
T-TEST K12
Vers.
EN-02_18 AVC
Date:
(IT 27_07_13 ver. 2 AM)
- 25 -
Preliminary Setting
• “ Informazioni ” / Info - move the mouse to the right of the
field name and then click left. The field will activate and turn
yellow. Enter the relative name and press
“Invio” to confirm .
• “ Acquisizione ” / Logging - set the logging interval (this value is
expressed in seconds), move the mouse onto the pre-set value
and then click left: the field will activate and turn yellow. Enter
the desired value and confirm by pressing
“Invio” .
• “ Modalità ” / Mode - from the drop-down list choose either auto
or manual mode:
Manuale: when no load or pressure sensor is being used
Automatica: in case a load or pressure sensor is available and
connected to the TTEST K12 “LOAD” socket
• “ Misura ” / Measurement - from the drop-down list choose the
preferred mode for each of the following:
1. Sensori - “ Assoluta ” o “ Differenza ”
Sensors - Absolute or Zeroed
Select
“Differenza” if you wish to zero the sensors’ values
(channels 1 to 12) when starting a new test.
2. Carico - “Assoluta” o “Differenza”
Load - Absolute or Zeroed
Select “Differenza” if you wish to zero the load sensor value
when starting a new test.
3. Ausiliario - “Assoluta” o “Differenza”
Temp or AUX - Absolute or Zeroed
Select “Differenza” if you wish to zero the “TEMP/AUX
(4..20 mA)” sensor value when starting a new test.
• “ Sensori ” / Sensors To enable which of the available sensors
are to be logged, click left with your mouse on each sensor
number of interest ( “n° Sensore” ) so that its field turns blue.