User manual
T-TEST K12
Vers.
EN-02_18 AVC
Date:
(IT 27_07_13 ver. 2 AM)
- 11 -
Section 2
Software Manual
(ver. 1.1.3)
Description
The Windows application software
“
T-TEST -
CONTROL PANEL”
supplied with the equipment, is designed to run, via a USB serial line,
the data acquisition and their graphic visualization as Time
–
Displacement / Load diagrams, as well as all programming and
controlling functions of the unit.
The software is structured in five user-friendly panels:
•
Control Panel
From this main panel the operator can run the connection to the
“T
-
Test K12”
unit and access the four further panels
•
Configuration Panel
This panel is used to display the system parameters (these ones
cannot be modified by the users) such as firmware version, ID and
serial number of the unit and also to set the sensors parameters
as Name, Engineering unit, Precision and Calibration Table
•
Acquisition Panel
From here the user can configure the data relative to the test
being started:
o
Info
General details of the test
o
Acquisizione / Log
Logging Interval (in seconds)
o
Modalità / Mode
Measurement and Load Type
o
Sensori / Sensors
Enables sensors to be logged
Once the setting is completed, the same panel will serve to start
or stop the acquisition session.
•
Data Panel
Access this panel to display file details of a test previously saved.
•
Measurement Panel
This last panel allows the
operator to monitor the sensors’
measurements in real time.