www.boutiquecamping.com
|
+44 (0) 203 394 2986
|
weekender luna instructions
1.
2.
Unclip the straps and roll out the tent in full with the black groundsheet
face down on the ground (1). Locate the door and move to correct
postion.
TIP: Please make sure the ground is flat. Not only to create
the perfect shape, but also to make sure you have a good sleep.
Peg out groundsheet with the small pegs (8) pulling it out tight as you
working your way round the tent.
TIP: We start with the door and work
round the circle, pegging the groundsheet eyelet and the elastic ring
on the tent together.
Firstly unpack your Lightwieght Luna Bell Tent
1. The tent and ground sheet rolled up
2. Centre pole
3. Door canopy pole
4. Spares bag – 2x guy ropes, 1x outer peg 1x 5.
groundsheet peg 1x ground sheet patch 1x canvas patch
5. Mallet
6. Instruction
7. Outer pegs for guy ropes
8. Inner pegs for groundsheet
9. Straight Wall poles
1
2
3
4
5
6
7
8
9
3.
4.
You are now ready to insert the centre pole (2). Simply clip the poles
together with the black rubbers at each end. Please note that at one
end of the centre pole there is a loop, this is the top. Enter the tent
through the front door and locate the centre of the tent, we refer to
this as the Apex or Cone.
It is now time to add the Wall Poles (9), we refer to these as the Ribs.
Extend each of the Ribs and take them inside the tent. Each one needs
to be fitted to each wall seam. Locate the top position, insert into
pocket and then move into position at the bottom, so the pole is close
to the seam and the groundsheet. You can then Velcro this into place.
