6
Use
ALKALINE
batteries only.
To install the
batteries:
●
1
Remove the
battery cover by
disengaging the
clip at the back.
●
2
Align the polarity
of the batteries
correctly, with
the positive "+"
toward the coil
plug connection,
as indicated by
the + and –
indicators on the
housing.
●
3
Insert (2) 9-Volt
ALKALINE
batteries, with the contacts pointed inward,
and press down on the back of the batteries to snap them into place.
Some brands of batteries will require moderate force to clear the
retaining tabs.
●
4
Replace the battery door.
Most metal detector problems are due to improperly installed
batteries, or the use of non-alkaline or discharged batteries.
If the
detector does not turn on, please check the batteries.
BATTERIES
DO NOT MIX OLD AND NEW BATTERIES
