II. HEIGHT ADJUSTMENT
Stand with the detector in one hand, with the coil on
the ground, a few feet in front of you. If the stem is
not set at a comfortable height, push the button on
the lower rod to change the length. If you make a
large adjustment, wrap the cable again, starting at
the top.
CAUTION:
Do not pull on the cable where it
connects to the detector body. It is
permanently attached; too much force
could damage the connection.
II. HEIGHT ADJUSTMENT
Stand with the detector in one hand, with the coil on
the ground, a few feet in front of you. If the stem is
not set at a comfortable height, push the button on
the lower rod to change the length. If you make a
large adjustment, wrap the cable again, starting at
the top.
CAUTION:
Do not pull on the cable where it
connects to the detector body. It is
permanently attached; too much force
could damage the connection.