9e997
6
Xpedia 360IX Feeding System Installation Instructions
3/21/13
Feed manger mounting
l997_3
3.
Upright
Post
Grind off
excess and
smooth
Assemble feed manger
l997_4
4.
Alignment of feed manger
l997_2
2.
2.1 Feed Manger Assemble
1.
Align the back of the feeder shoot with the cir
-
cumference of the rotary. It should be tangent
at its point of attachment. (See
Figure 2
.)
2. Attach the Feed Manger Support Arm to the
arch upright post on the platform using the
M10 U – bolts. Observer Standard height
recommendation for support arm (Figure
2). The height can be adjusted based on the
average cow size of the herd. After the Feed
Manger Support Arm is secured to the arch
upright post on the platform grind off excess
U-Bolt length and smooth. (See
Figure 3
.)
3. Assemble the Feed Manger to the Feed Man-
ger Support Arm using M12 Bolts. The bolt
head should be installed on the inside of the
Feed Manger and the threads to the outside.
The Feed Manger and Support Arm have
several mounting hole locations to allow for
adjustment depending on the average cow
length of the herd. (See
Figure 4
.)
