background image

Manual Pairing mode

Step 1: Take the Earbuds out of the Charging Case;
Step 2: When both Earbuds blue light will slowly  ash, quickly press 
three times the Multi-function button, they will go into connection 
mode,    and  blink  for  3seconds  &  automatically  connect  to  each 
other.

Common Problem with Solution

If  one  side  earbud  working  only: Then  simply  put  back  both 
earbuds  in  the  case  and  take  out  again  or  perform  Factory 
Reset ;

0If  earbuds  not  in  scan  mode:  Then  simply  put  back  both 
earbuds  in  the  case  and  take  out  again  or  perform  Manual 
pairing mode;

Earbuds  need  often  clean  the  in-ear  part,  to  avoid  any  dirty 
things blocking it and may cause the volume low.

Speci cations:

Model No                                                    Boult Audio ZigBuds

Bluetooth Version                                    V5.0

Earbuds battary capacity                      3.7V, 40mAh X 2

Earbud weight                                          4.5g each

Charging case battery capacity           500mAh

Working range                                          10M above

Talk time                                                     3.5Hours

Earbud standby time                              40Hours 

IPX Sweat and water resistant             5

Summary of Contents for Boult Audio ZigBuds









Reviews: