Note: If the earbuds don't automatically Power On when taken out of
the charging case, you can follow up the below step: Manually long
press for 4 seconds in power o mode, blue power on indicator light
will ash 2 times and that means the earbuds have powered on.
Single Earbud Use
Step 1: At this stage your earbuds are in stereo mode & connected
to your Bluetooth device.
Step 2: Simply remove left or right earbud from your ear.
Step 3: Place this earbud back in to the charging case.
Step 4: Congratulations, you are now using mono/solo mode.
NOTE 1: There is no Master Earbud.
NOTE 2: To switch to stereo mode, simply take the earbud (L/R) out
of the charging case & place in your ear. The earbud will
automatically power on & pair with each other hence enabling for
stereo usage.
Charge the Earbuds
Put the earbud back into the charging case in the orientation
(No need to identify L/R)
Red light on the earbuds will indicate they are still being
charged. This light will go o once the earbuds have been
completely charged.
When both two earbuds are fully charged, the carrying case
will switch o to save power.
