Power ON
（
First time user
）
Step 1: Take the Earbuds out of the Charging Case;
Step 2: Please wait, both Earbuds will automatically pair to each
other. They will blink for 3seconds & automatically connect to each
other.
Wait for BLUE/RED LIGHTS on the right earbud.
This BLUE/RED LIGHTS means it has gone into Connection Mode.
Note: For pairing to the rst time RED/BLUE Lights will only blink on
the left earbud. For next time pairing procedure RED/BLUE LIGHTS
will blink on either left or right earbud. This happens after the
earbuds remembers the device.
Connection Mode
Step 3: Turn on Bluetooth on your device & then scan.
Step 4: Search for Boult Audio ZigBuds and pair accordingly.
Congratulations, your earbuds are connected successfully now.
Enter the password 0000 if asked for , and connect the earbuds to
your device.
Step 5: You may now enjoy your music or any other entertainment
form factor.
Please refer to the
Safety Precautions
mentioned on the last page
of this manual before operating this device.
