Bottoms Up Beer BEER BUDDY, Instructions Manual

Page: 42 / 44

18
If the keg is still not pressurised, pull briefly on the keyring on the safety
valve to be sure there really is no pressure in the installation.
If you hear a hissing sound, there is something wrong with the pressure
regulator. In this case, contact us immediately.
If you do not hear a hissing sound, close the pressure regulator. The CO2
cartridge may not be fully seated. Try screwing the gas cartridge further in,
then repeat the previous steps. However, under no circumstances should
you unscrew the cartridge unless you are certain it is completely empty.
You will find more details under ‘Changing the screw-fit 16g CO2
cartridge’.
You have pressure in the keg, but it is much too high. This happens when
you first tap the keg. Please see further details under ‘Step 3) Setting the
pressure’.
You have already dispensed one or two beers, but want to reduce the pres-
sure? Close the pressure regulator a little further, then pull on the keyring on
the safety valve to release pressure from the system.
There is a slight delay on the pressure regulator due to it automatically read-
justing between the upper and lower set limits for the desired pressure.
Setting the pressure correctly