Bot’n Roll ONE A User Assembling Manual
4.3.10.
BATTERY PLACEMENT
The battery is placed on the bottom part of the acrylic
base using three Velcro strips.
Before attaching the Velcro strips check that the area is
not stcking dirty, or greasy!
If necessary, use a glass-cleaning product to clean the
surfaces and let them dry properly!
Glue the two velcro strips to the battery pressing hard for
proper attachment. Aferwards, remove the stckers
protecton to place the battery on the robot.
Put the battery on the Bot'n Roll ONE A pressing again for
a good grip. Attenton not to damage the components on
the robot board!
Afer the battery is secured with Velcro and fully charged,
attach the connector and Bot'n Roll ONE A is ready to be
programmed!
Well done!
©Copyright 2018, SAR - Soluções de Automação e Robótca, Lda.
43
Fig. 66: Batery placement
Summary of Contents for ONE A
Page 1: ......