8
■ CONNECTIONS
A.
Turn off the main power supply
of the STB before
connecting or disconnecting
the LNB
. Connect the TV's RF antenna connector to the
ANT IN
socket of the STB.
B. RF Connection:
a. Connect the RF cable from the
TV OUT
socket of the STB to the
RF IN
socket on the VCR.
b. Connect another RF cable from the
RF OUT
socket of the VCR to the
RF
IN
socket of the TV.
C. Connect the coaxial cable from the LNB into the
LNB
socket of the STB.
D. To connect to another STB, use the
LOOP
socket of the STB.
E. Use the
VCR / TV Scart
socket to connect to the scart socket of a TV / VCR.
F. Use the
AUDIO L, R / VIDEO
socket to connect to the Line socket of the TV / VCR.
G. Use the
0/12 Volt
socket to connect it with the 0/12 volt switch.
H.
RS232
socket can be used to download and upgrade the software of the STB.
İ. Connect the main power plug of the STB to the mains wall socket.
(~AC 95-250V
50/60Hz, Max 30 watts
)
J. Connect the
S/PDIF
output with the input connector of a device which is capable of
receiving an optical digital Audio input.
K. Connect the ETHERNET port of the STB to a HUB or xDSL Modem. A Direct LAN
cable is required to connect to a HUB or a Modem.
SET TOP BOX CONNECTION
