What you’ll need:
Healthy Plant
Cloning Solution (Botanicare
®
Power Clone Solution provided)
pH meter
pH adjuster
Scalpel or shears
Purified water
1. Prepare reservoir
• Fill reservoir with water above pump but below manifold.
• Add rooting solution (Power Clone Solution @ 30 ml/gal) stir.
• Add AquaShield (optional) 10 ml/gal stir.
• Test pH of solution. Ideal pH is 5.8-6.3.
• Adjust up or down using pH adjuster and retest.
2. Take a cutting.
• Take cuttings from top half of plant where the most growth occurs.
• Locate a shoot that branches off the main stem and a primary leaf
(an internode).
• Cut as close to the internode as possible. This allows your plant to
heal faster.
• Make sure your cutting is at least 4 inches long to allow 1 inch to sit
below the neoprene collar and 2 inches above.
water line
pump
manifold
How to clone with your Power Cloner
4”
