5. Install the manifold
a
Place the manifold into the reservoir so the pump sits in the
recessed area.
b
Make sure the filter faces away from the cord guide.
c
Push down firmly to seat the manifold in the reservoir.
6. Install the air pump & airstones
a
Power Cloner 77/180 only- Cut vinyl tube in half.
Power Cloner 45- Do not cut vinyl tube. It is already trimmed
to the correct length.
b
Power Cloner 45- Attach one airstone to one end of the tube
and the air pump to the other end.
Power Cloner 77/180- Repeat for the second airstone.
5a
6b
6b
Power Cloner 77/180 Pump Shown
