Section 2 - General Arrangement & Specifications
240 Outrage-Owners Manual
7
240 Outrage,Through-hull Fittings
1
Anchor Locker Drain
2
Forward In-Deck Storage Drain
3
Forward Bilge Drain, 800 GPH
4
Leaning Post Livewell Inlet, Optional
5
Fuel Vent
6
Waste Vent
7
Raw-water Inlet
8
Macerator Pump-out, Optional
PORT
AFT
STARBOARD
5 6
11
10
7
8
9
4
1
2
3
12
13
14
16
15
9
Port Fishbox Outlet
10
Starboard Fishbox Outlet
11
Aft bilge drain, 1100 GPH
12
Port Deck Drain, (behind Trim Tab Ram)
13
Port Motorwell Drain
14
Garboard Drain
15
Starboard Motorwell Drain
16
Starboard Deck Drain, (behind Trim Tab Ram)
The deck drain provides self-bailing capabilities while the
boat is static in the water and no passengers on board.
This feature prevents the accumulation of water in the
cockpit. the drain must be in place when underway.
NOTICE
!
Depending on the type of boat you have, you may
have underwater fittings that need drain plugs.
Garboard drain plugs and fishbox drain plugs need
to be in place before the boat goes into the water.
Any fitting that will be underwater needs to be
plugged or the seacock needs to be closed
NOTICE
!
Through hull fittings should be checked for proper
seal annually. When the boat is in the water the un-
derwater fittings can be checked for dripping. It is
recommended that the underwater fittings be re-
moved, cleaned and resealed every other year.
NOTICE
!
If the through hull fittings need to be replaced, it is
recommended that an authorized Boston Whaler ®
dealer perform this type of repair.
Through hull fit-
tings that are improperly installed can cause pre-
mature hull failure and may void the Boston
Whaler® limited warranty.
NOTICE
!
