Section 5 - Water & Waste System
240 Outrage-Owners Manual
27
The 240 Outrage bilge pump system
consists of: (1)-1100 GPH pump and
(1)-800 GPH bilge pump that are each
operated by a float switch that will ac-
tivate automatically when water in the
bilge reaches a certain level. The 800 GPH pump is
located forward of the fuel tank and can be accessed
through the console interior. The 1100 GPH pump
is located aft of the freshwater tank and can be ac-
cessed through the motorwell hatch.
Bilge Pump
%,/*(3803
The bilge pump is wired directly to the battery. Be sure
that the bilge pump float switch is clear of debris to
prevent continuous operation and subsequent dis-
charge of the battery.
NOTICE
OPERATION:
There is a switch marked AFT BILGE and FWD
BILGE on the switch panel. Depressing the switch
will energize the pump regardless of the position of
the float switch. The pump discharges water over-
board via a thru-hull fitting.
MAINTENANCE:
The bilge pump is a completely sealed unit and main-
tenance is very simple, but it will require you to check
around the float switch for debris and gummy bilge
oil that could impede the bilge pump from working
properly. Check the bilge pump and hoses for wear;
clean and repair if neccessary.
1
1100 GPH Bilge Pump, Aft
2
Float Switch, Aft
3
Bilge Pump Drain Line, Aft
4
Bilge Pump Drain Fitting, Aft
5
800 GPH Bilge Pump, Forward
6
Float Switch, Forward
7
Bilge Pump Drain Line, Forward
8
Bilge Drain Fitting, Starboard Gunwale
Bilge Pump System Diagram
!
1
2
3 4
5
6
7
8
