2-7
130 Super Sport
Section 2 • General Information
R
Through Hull Fittings
Fig. 2.7.1
1
2
Location of Thru-Hull Fittings
NOTICE
• Depending on the type of boat you have, you may have underwater fi ttings. Any fi tting
that will be underwater needs to be plugged or the seacock needs to be
closed.
• Through hull fi ttings should be checked for proper seal annually. When the boat is
in the water the underwater fi ttings can be checked for dripping. It is recommended
that the underwater fi ttings be removed, cleaned and resealed every other year.
• If the through hull fi ttings need to be replaced, it is recommended that an
authorized Boston Whaler
®
dealer perform this type of repair. Through hull
fi ttings that are improperly installed can cause premature hull failure and may
void the Boston Whaler
®
limited warranty.
• A standard 1” “Snap-Tite” style plug can be used to replace the drain plug(s) in your
boat. It is recommended that you carry spare plugs to be used in the event that
the drain plug(s) become lost or damaged.
1
3
• The cockpit drain provides self-bailing capabilities while the boat is static in the water
and no passengers on board. This feature prevents the accumulation
of water in the cockpit. The drain plug must be in place when underway or
occupied.
View inside
bow locker
1
2
BOW LOCKER DRAIN
DRAIN PLUG
COCKPIT DRAIN
3
