Vercise™ DBS Programming Manual
91053785-17 59 of 1705
Synchronizing Data
en
Synchronizing Data
To synchronize data between the database on the Clinician Programmer and the
Patient Card:
1
Insert the Patient Card into any unused USB port. The Patient Card may be any
external storage device (for example, a USB flash drive).
2
Click
on the toolbar of any screen.
3
Check the box in front of a specific patient’s name or click
to select
all the patients.
Note:
If a discrepancy is found between a patient’s information on the Clinician
Programmer and the Patient Card, a window will pop‑up displaying both
sets of information. Click
under the correct set of information
or click
to cancel data synchronization for this patient.
4
Click
. When synchronization is complete, the synchronized
patients’ names will appear in the right side of the screen, and no names will be
selected.
5
Click
.
