Boston Scientific LATITUDE 6288 Patient Manual Download Page 49

Page: 49 / 102

tting Up Y

our

Communic

ator

LATITUDE™ Communicator

Patient Manual

•

The LATITUDE indicator will flash yellow for up to 1

minute.

•

All the Communicator indicators will light for

approximately 1 second.

• If the LATITUDE indicator is not lit, check that both ends

of the power supply are plugged in firmly. Check if the

light on the power supply is lit.

For the following steps, make sure you use the Ethernet

cable provided with the USB Ethernet adapter and not the

telephone cable provided with the Communicator.

Insert the standard (rectangular) end of the USB cable

(included with the USB Ethernet adapter) into one of the

USB ports on the Communicator labeled

4. Insert the square end of the USB cable into the end of the

USB Ethernet adapter nearest the adapter light.

5. Insert the Ethernet cable (included with the USB Ethernet

adapter) into the opposite end of the adapter.

Plug the Ethernet cable into an Ethernet port for your

internet service, such as a modem, router, or Ethernet wall

jack.
•

The USB Ethernet adapter is properly connected if the

green light on the front of the USB Ethernet adapter is lit

(solid or flashing).

When the Heart button flashes on the

Communicator, press it.
•

Your Communicator’s wave lights will flash green in

sequence and repeat for several minutes as shown in

“Using the Heart Button” on page 16

Summary of Contents for LATITUDE 6288







































































































Search results

Summary of Contents for LATITUDE 6288

Reviews:

Related manuals for LATITUDE 6288

Brands by name

Popular brands

Boston Scientific LATITUDE 6288, Patient Manual

Search results

Summary of Contents for LATITUDE 6288

Reviews:

Related manuals for LATITUDE 6288

Brands by name

Popular brands