background image

4

Applies to PV800 only
Australian and New Zealand Users:

This device has been tested and found to
comply with the limits for a Class B digital
device, pursuant to the Australian/New
Zealand standard AS/NZS 3548 set out by 
the Spectrum Management Agency. 

Caution! Disconnect power before servicing.

N-93

volende noem(en) of richtlijn(en) beantwo-
ordt: a cui si riferisce questa dichiarazione è
conforme alla/e sehuente/i norma/o docu-
mento/i normativo/i:

European Users:

This equipment has been tested and found to
comply with the following European directive:

(i) EMC Directive 89/336/EEC amending
directive 92/31/EEC  93/68 EEC as per

EN 50081-1: 1992 according to
EN55013: 1990 Class B

EN50082-1: 1997 according to
EN61000-4-2: 1995
EN61000-4-3: 1997
EN61000-4-4: 1995

(ii) Low Voltage Directive (Safety) 72/23/EEC
as per EN60065: 1993

Applies to PV800 only
Japanese Users:

This equipment is in the Class 2 category
(Information Technology Equipment to be
used in a residential area or an adjacent area
thereto) and conforms to the standards set by
the Voluntary Control Council for Interference
by Information Technology Equipment aimed
at preventing radio interference in such resi-
dential areas.

When used near a radio or TV receiver, this
equipment may become the cause of radio
interference.  Read the instructions for correct
handling.

PV 4/6/8 MANUAL 7.1.99 ƒ  7/30/99  4:01 PM  Page 4

Summary of Contents for PowerVent PV400













Reviews: