Boston Acoustics Avidea 610, Service Manual

Page: 34 / 35

51
ENGLISH
Symptom
DVD Receiver 2.0
Cause Remedy
There is no disc in the player.
There are no signals recorded on the
side of the disc being played.
The TV is not turned on.
The connection cords are not properly
connected.
The picture is slightly distorted during
fast forward and fast reverse operations.
The audio output cables are not
properly connected.
The volume control of the TV or
amplifier is not adjusted properly.
The player is in a special playback
mode.
A nearby device is generating noise.
The disc is dirty.
The disc is damaged.
There is condensation on the
optical lens.
Time is required for the unit to detect
the disc type and size and for the
rotation of the motor to stabilize. This
is not a malfunction.
The disc is not placed horizontally.
The video format of the disc being
played does not match that of the con-
nected TV monitor.
The DVD disc being played does not
contain the recording of subtitles.
The subtitle mode is set to off.
The DVD disc being played does not
contain the recording of more than
one audio (or subtitle) language.
The DVD disc being played does not
contain the recording of more than
one angle.
You are attempting to switch the
angle in a section where more than
one angle is not recorded.
Playback does not start when the
button is pressed.
Playback starts but no image/sound is
seen or heard.
The picture is distorted when the
image is fast forwarded or fast
reversed.
No sound is heard.
The picture does not look good or the
picture/sound quality is poor.
It takes a while for the disc to start
playing.
The tray opens automatically.
The top and bottom of the screen
cannot be seen, or the screen becomes
black and white.
Subtitles are not displayed.
The voice (or subtitle) language
can not be changed.
The viewing angle cannot be changed.
•
•
•
•
Load a disc and press the button.
Turn the disc over and properly place it on
the disc tray.
Turn on the TV.
Properly reconnect the connection cords.
This is not a malfunction.
Properly connect the audio cables.
Set the sound volume to an appropriate
level.
Press the button to resume normal
play back mode
Separate this unit as far as possible from
the device you think is generating the noise.
Refer to the “ Disc handling precautions ”
section and wipe dirt from the disc.
Use a new disc.
Refer to the “ Caution on condensation ”
section and evaporate the condensation.
Approximately 10 to 20 seconds are
required for a disc to start playing, although
the time differs depending on the disc.
Properly place the disc on the tray.
Refer to the “ Video Formats ” section and
use a disc with the appropriate video format
for your TV or a TV with the appropriate
video format for the disc.
The subtitle cannot be displayed when the
DVD disc being played does not contain
the recording of subtitles.
Press the SUBTITLE ON/OFF button to
switch on the subtitle mode.
The voice (or subtitle) language cannot be
changed when the DVD disc being played
does not contain the recording of more
than one voice (or subtitle) language.
The viewing angle cannot be changed
when the DVD disc being played does not
contain the recording of more than one
angle.
More than one viewing angle may be re-
corded only in limited sections in a disc.
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
In Case of Difficulty
W
W
W
10
10
6
9
38