-7-
IN ADDITION TO THE OTHER WARNINGS CONTAINED IN THIS
MANUAL OBSERVE THE FOLLOWING FOR SAFE OPERATION
• Use the BOSTITCH pneumatic tool only for the purpose for which it was designed.
• Never use this tool in a manner that could cause a fastener to be directed toward the user
or others in the work area.
• Do not use the tool as a hammer.
• Always carry the tool by the handle. Never carry the tool by the air hose.
• Do not alter or modify this tool from the original design or function without approval from
BOSTITCH.
• Always be aware that misuse and improper handling of this tool can cause injury to
yourself and others.
• Never clamp or tape the trigger or contact trip in an actuated position.
• Never leave a tool unattended with the air hose attached.
• Do not operate this tool if it does not contain a legible WARNING LABEL.
• Do not continue to use a tool that leaks air or does not function properly. Notify your nearest
Bostitch representative if your tool continues to experience functional problems.
“DIAL-A-DEPTH™” FASTENER CONTROL ADJUSTMENT
The DIAL-A-DEPTH™ Fastener Control adjustment feature provides close
control of the fastener drive depth: from flush with the work surface to
shallow or deep countersink. First, set the air pressure for consistent
drive in the specific work as described on page 4, then use the
DIAL-A-DEPTH™
Fastener Control adjustment to give the desired
depth of drive.
The adjustable exhaust deflector can be rotated to any
desired position by hand without the use of any tools.
DIRECTIONAL EXHAUST DEFLECTOR
Exhaust Deflector
360º
Summary of Contents for N75C
Page 32: ......
