4 - ENG
Check operation of the contact arm mechanism frequently. Do not use the tool if the arm is
not working correctly as accidental driving of a fastener may result. Do not interfere with the
proper operation of the contact arm mechanism.
Do not drive fasteners on top of other fasteners or with the tool at an overly steep angle as this
may cause deflection of fasteners which could cause injury.
Do not drive fasteners close to the edge of the work piece as the wood may split, allowing the
fastener to be deflected possibly causing injury.
This nailer produces SPARKS during operation. NEVER use the nailer near flammable substances,
gases or vapors including lacquer, paint, benzine, thinner, gasoline, adhesives, mastics, glues or
any other material that is -- or the vapors, fumes or byproducts of which are -- flammable, combustible or explosive.
Using the nailer in any such environment could cause an EXPLOSION resulting in personal injury or death to user
and bystanders.
Use of this product may expose you to chemicals known to the
State of California to cause cancer, birth defects and other reproductive harm.
Avoid inhaling vapors and dust, and wash hands after using.
• Avoid prolonged contact with dust from power sanding, sawing,
grinding, drilling, and other construction activities. Wear protective
clothing and wash exposed areas with soap and water.
Allowing dust
to get into your mouth, eyes, or lay on the skin may promote absorption
of harmful chemicals.
Use of this tool can generate and/or disburse dust, which may
cause serious and permanent respiratory or other injury. Always use NIOSH/OSHA
approved respiratory protection appropriate for the dust exposure. Direct particles
away from face and body. Always operate tool in well-ventilated area and provide
for proper dust removal. Use dust collection system wherever possible.
ALWAYS USE SAFETY GLASSES. Everyday eyeglasses are NOT
safety glasses. Also use face or dust mask if operation is dusty. ALWAYS WEAR
CERTIFIED SAFETY EQUIPMENT:
• ANSI Z87.1 eye protection (CAN/CSA Z94.3),
• ANSI S12.6 (S3.19) hearing protection,
• NIOSH/OSHA respiratory protection.
Before operating this tool, carefully read and understand all instructions in
Important Safety Instructions.
SAVE THESE INSTRUCTIONS
NAIL SPECIFICATIONS
BRN175
Nails
0.120" (3mm) diameter, 15º wire collated roofing nails
Lengths
3/4" (19 mm) - 1-3/4" (44.5 mm)
Air Inlet
1/4" NPT (6.4 mm)
NOTE: Use only BOSTITCH approved fasteners
MAINTAINING THE TOOL
When working on air tools note the warnings in this manual and use extra care when
evaluating problem tools.
BRN175_9R209323_MAN_kf V2_multi.indd 4
1/28/15 7:41 AM
