24
Filler Metal
Solid Mild Steel wire
Gasless Flux cored Mild
Steel Wire
(Known as GS)
Drive Feed Roller Selection
-Solid mild steel
-Stainless steel wire
Flux cored wire
Aluminium wire
Polarity
Wire Type -Gas shield wire
(solid or CO2 shielded flux)
Self-shielded
Flux core Wire
Aluminium
Notes
• Use Industry standard - copper coated ER70S-6 Steel MIG Wire.
This requires a shielding gas (CO2 or argon/CO2 mix),excellent
results on panel steel.
• Use Industry standard flux cored ER71T-GS Steel MIG Wire.
This does not require a shielding gas.
• Suitable for outside use where gas shield can be blown away or
not available.
• Suitable for seldom use or when bottle hire is not practical or too
costly for small jobs and infrequent use.
• Great on galvanised materials
• Not suitable for panel steel
• Leaves chalky residue. This is normal.
• Producers smoke and splatters.
It is important that correct drive roller is used
to get the best results.
“V” groove Roller. Roller has a small V shaped groove
to guide the wire.
“V Knurled” roller (assists in gripping as wire is soft)
“U” groove Roller (assist in gripping as wire is softest)
Machine can be used in both DC + and DC - modes
“-” earth
“+” earth
3m only for push torch, Teflon liner, “U” groove roller, alloy tips or
one size larger, argon shielding wire
HELPFUL INFORMATION