6
whether the connection is high speed or not.
2.2 Quick Start: IP Camera Auto Detection
Please connect the IP Camera with your Gateway or Ethernet Hub. The
following figure suggests the recommended set-up:
Step1:
Please Install the IP Auto Detect Tool (Only supports WinXP and
Win2000).
7
Step2:
Execute the software “IPDetect.exe” on the Desktop
Step3:
Select a LAN Device :Network Adapter
(It can not support wireless
Network Adapter), Click the button “Auto Detect”
Step4:
Find the Internet Camera by highlighting it in the “IPCam List” and
assign the IP address by clicking the button “Setting”
Then you must follow the next steps to get Network information (Sub Net,
Net Mask and Default Gateway Address):
Step5:
Click Start->All Programs->Accessories->Command Prompt
