Boss TGS 1100, Installation & Owner'S Manual

Page: 9 / 27

Slide-In Attachment Installation Procedure
9
Slide-In Attachment
Installation Procedure
ITEM # QTY. PART # DESCRIPTION
1 1 TGS06051 SLIDE-IN ATTACHMENT
2 1 TGS06254 SPINNER PROTECTOR
3 1 TGS10981 DRIVER SIDE STABILIZER ARM
4 1 TGS10976 PASSENGER SIDE STABILIZER ARM
5 2 TGS10986 RATCHET STRAP
6 1 HDW06291
5/8” X 2
-
1/2” CLEVI
S PIN
7 1 HDW05544 #16 COTTER HAIRPIN
8 8 HDW05853
3/8”
-
16 X 1” ST
-ST HEX HEAD BOLT
9 6 HDW01728
½”
-13 X 1-
1/2” HEX HEAD BOLT
10 8 HDW05854
3/8”
-16 ST-ST NYLON LOCK NUT
11 6 HDW01748
½”
-13 NYLON LOCK NUT
12 2 HDW10982
½” FENDER WASHER
Note: This Installation Procedure covers
the Slide-In Attachment (TGS10950) for
TGS 600 and TGS 1100 spreaders.
1. Refer to Figure 3. Mount Slide-In
Attachment (1) to Spreader using four
½”
-13 X 1-
1/2” H
ex Head Bolts (9), four
½”
-13 Nylon Lock Nuts (11
), one 5/8”
X
2-1
/2”
Clevis Pin (6), and one #16 Cotter
Hairpin (7).
2. Mount Spinner Protector (2) using
existing 3/8”
-
16 X 1” Hex Head Bolts and
3/8”
-16 Nylon Lock Nuts as shown in
Figure 3.
Figure 3. Slide-In Attachment Installation Procedure G10385