g373481
Figure 17
3.
Install new cutting edge with new hardware.
Torque to 101 N·m (75 ft-lbs).
Storage
Storing the Plow
1.
Drive the plow to your storage location and
remove the plow; refer to your machine
Operator’s Manual
.
2.
Grease any exposed metal on the hydraulic
cylinder rods.
3.
Lightly sand and use touch-up paint on painted
areas that are scratched, chipped, or rusted.
Removing the Plow from
Storage
1.
Check the torque of all fasteners; tighten as
necessary.
2.
Check the hydraulic lines and hoses for cracks
or leaks.
3.
Check the cutting edge for wear.
4.
Lightly sand and use touch-up paint on painted
areas that are scratched, chipped, or rusted.
5.
Attach the plow to the machine; refer to your
machine
Operator’s Manual
.
6.
Move the plow through its range of motion to
check the hydraulic cylinder rods.
10
Summary of Contents for SNR24023
Page 12: ......
