Note:
To quickly adjust the skids if they loosen,
rest the poly edge on the pavement, then adjust
the skids down.
g383363
Figure 23
Raising the Skids
1.
Park the machine on a level surface and raise
the attachment.
2.
Shut off the engine, remove the key, and wait
for all moving parts to stop before leaving the
operating position.
3.
Loosen the nuts that secure both skids to the
auger sides until the skids slide up and down
easily.
Important:
Support the auger blades above
the ground using the skids.
4.
Place a board, of your desired thickness, under
the poly edge of the snowthrower.
g385838
Figure 24
5.
Start the machine, put it in the float position, and
tighten the skids.
14
