Boss MSC01141, Installation Instructions

Page: 2 / 4

6. Fully raise the kickstand caster shoe and lock it
into place with the existing kickstand spring pin
(
Figure 3 ).
7. Remove the safety jack stands and lower the
plow.
8. Lower the kickstand caster shoe and lock it into
place.
9. Follow the plowing procedures in your Owner’s
Manual .
For XT V-Blade Plows
Model MSC09216
1. Assemble the casters as shown in Figure 4 .
g038530
Figure 4
1. Nut (5/16 inch) 5. Nut (3/8 inch)
2. Washers 6. Large caster
3. Small caster base 7. Small caster
4. Carriage bolt 8. Bolt (5/16 inch)
2. Park the machine on a level surface, raise the
plow fully, and place 2 safety jack stands under
the plow cutting edge.
3. Shut off the engine, wait for all moving parts to
stop, engage the parking brake, and remove
the key.
4. Slide the large caster shoes into the shoe
holders on the plow and secure them with a
quick pin (
Figure 5 ).
Note:
Adjust the number of washers above and
below the shoe holder as needed.
g038531
Figure 5
1. Quick pin 3. Large caster shoe
2. Shoe holder
5. Slide the small caster shoe into the center shoe
holder and secure it with a quick pin (
Figure 6 ).
Note:
Adjust the number of washers above and
below the center bushing as needed.
g038532
Figure 6
1. Quick pin 3. Washers
2. Small caster shoe
6. Remove the safety jack stands and lower the
plow in the “V” position.
7. Follow the plowing procedures in your Owner’s
Manual .
2