Boss HPM Series Operating Instructions Manual Download

Page: 6 / 8

BM005-V2

SETUP/ INSTALLATION (CONT)

If required the handle can rotate 360° to locate the best pumping position.

Pump the handle until the part has been removed (Figure 5).

Once the part has been pulled free turn the control valve counter clockwise

to retract the puller piston (Figure 6).

Figure 6

Figure 5

Summary of Contents for HPM Series

Page 1: ...information provided in this manual before using the equipment They are provided for the safety of those operating the equipment and to prevent personal injury and or damage to property when using this equipment THIS EQUIPMENT SHOULD ONLY BE USED BY OPERATORS WHO HAVE BEEN TRAINED IN THE SAFE USE OF HIGH PRESSURE HYDRAULIC EQUIPMENT www bosshydraulics com au Form BM005 ...

Page 5: ...vance position see Figure 2 Figure 2 3 Position the puller and attachments around the part to be pulled Remove the slack by threading the puller down or adjusting the puller legs a Pump the handle until the removable cone touches the shaft b Adjust the centreline to ensure the puller is on the same plane as the shaft Figure 3 ...

Page 6: ...he handle can rotate 360 to locate the best pumping position 5 Pump the handle until the part has been removed Figure 5 6 Once the part has been pulled free turn the control valve counter clockwise to retract the puller piston Figure 6 Figure 6 Figure 5 ...

Page 8: ...BOSS HYDRAULICS Head Office 19 Ricketts Road Mt Waverley VIC 3149 I P 1300 BOSS HYD 1300 267 749 E sales bosshydraulics com au I W www bosshydraulics com au ...