BM005-V2
4
1.
SETUP/ INSTALLATION
WARNING:
• Always align the puller on the centreline of the part being removed. Failure
to do so can cause a catastrophic failure to any or all parts of the puller
and the components being used on.
• Align all puller jaws and pushing adaptor set ups on the same centreline
as the part being removed.
• Always support the object being removed.
• Stand behind and to one side of the puller when applying pressure.
• Never heat the object being removed. Heating the object can cause
damage to the puller.
• Do not try an pull objects that are beyond 952mm in reach or beyond an
opening of 1500mm.
Operation:
1)
Always make sure you have the correctly sized puller for the job and that
any attachments used are rated to the same level as the puller.
a.
Screw the foldable handle into the handle clevis as per the Figure 1.
Figure 1