23
MENU
OUTPUT SELECT
Specify the device (amp) that’s connected to the OUTPUT jacks.
Parameter
Value
Explanation
SELECT
LINE/PHONES
Choose this if you’re using headphones, or if
the GT-1B is connected to monitor speakers,
mixer, or digital recorder.
AMP NO TWEETER
Use this setting when connecting to a bass
amp that has no tweeter. The high-frequency
range is adjusted.
AMP WITH
TWEETER
Use this setting when connecting to a
tweeter-equipped bass amp.
DISPLAY
Here you can adjust the brightness of the characters in the display.
Parameter
Value
Explanation
CONTRAST
1–16
Higher values increase the brightness.
PLAY (PLAY OPTION)
Here you can specify how the pedals will work during
performance.
Parameter
Value
Explanation
EXP1 HLD (EXP 1 PEDAL
HOLD),
EXP2 HLD (EXP 2 PEDAL
HOLD)
OFF
The operational status of the EXP
1/2 PEDAL's FUNCTION (p. 18) is
not carried over when patches are
switched.
ON
If the EXP 1/2 PEDAL’s FUNC (p. 18)
are the same between 2 patches, the
operational status is carried over when
patches are switched.
For example, if EXP 1/2 PEDAL FUNC is
set to FOOT VOLUME in both patches,
the one before and the one after the
change, the volume corresponding to
the position the pedal is in (angle) at
the time of the patch change will be
maintained after the patch change.
On the other hand, if the patch being
changed to is set to WAH, the volume
will be in accordance with the value
set within the patch, and you’ll obtain
a wah effect that is in accordance
with a value that reflects the current
position (angle) of the pedal.
KNOB LOCK
OFF, ON
Specifies whether knob operations
will be disabled. If this is ON, knob
operations will be disabled.
DWN+UP
OFF,
TUNER,
LOOP,
MEM+1,
MEM-1
Specifies the function when the
[
I
] and [
H
] switches are pressed
simultaneously.
UP+CTL1
Specifies the function when the [
H
]
and [CTL1] switches are pressed
simultaneously.
PEDAL LIGHT
OFF, ON
Specifies whether the [
I
], [
H
], and
[CTL1] switches are lit or unlit.
