15
EFFECT
DELAY
This effect adds delayed sound to the direct sound, giving more
body to the sound or creating special effects.
Parameter Value
Explanation
DELAY
ON/OFF
OFF, ON
Turns this effect on/off.
TYPE
This selects which type of delay.
* The stereo effect is cancelled if a monaural effect or COSM amp is
connected after a stereo delay effect.
STANDARD
This is a simple monaural delay.
PAN
This delay is specifically for stereo output. This
allows you to obtain the tap delay effect that
divides the delay time, then deliver them to L and
R channels.
INPUT
OUTPUT L
OUTPUT R
Feedback
Dly Time
EffectLev
DELAY
Tap Time
REVERSE
This produces an effect where the sound is played
back in reverse.
ANALOG
This gives a mild analog delay sound.
TAPE
This setting provides the characteristic wavering
sound of the tape echo.
MODULATE
This delay adds a pleasant wavering effect to the
sound.
TERA ECHO
This effect uses MDP (Multi-Dimensional
Processing) technology to create a unique
ambience and a spaciousness that changes
according to your picking dynamics.
Common to STANDARD–MODULATE
Parameter
Value
Explanation
TIME
(DELAY TIME)
1 ms–2000 ms,
BPM
˜
–
¸
Adjusts the delay time.
* When set to BPM, the value of each
parameter will be set according to the
value of the “MASTER BPM” specified
for each patch. This makes it easier
to achieve effect sound settings that
match the tempo of the song.
* If, due to the tempo, the time is longer
than the range of allowable settings, it
is then synchronized to a period either
1/2 or 1/4 of that time.
FEEDBACK
0–100
This sets the amount of delay sound
returned to the input. A higher value will
increase the number of the delay repeats.
HIGH CUT
630 Hz–12.5 kHz,
FLAT
This sets the frequency at which the high
cut filter begins to take effect. When FLAT
is selected, the high cut filter will have no
effect.
E.LEVEL
(EFFECT LEVEL)
0–120
Adjusts the volume of the delay sound.
PAN
Parameter
Value
Explanation
TAP TIME
0–100%
Adjusts the delay time of the left channel
delay. This setting adjusts the L channel delay
time relative to the R channel delay time
(considered as 100%).
MODULATE
Parameter
Value
Explanation
MOD RATE
0–100
Adjusts the modulation rate of the delay
sound.
MOD DEPTH
0–100
Adjusts the modulation depth of the delay
sound.
TERA ECHO
Parameter
Value
Explanation
TIME
0–100
Adjusts the length of the effect sound.
FEEDBACK
0–100
Adjusts the decay of the effect sound.
E.LEVEL
(EFFECT LEVEL)
0–100
Adjusts the volume of the effect sound.
TONE
-50–+50
Adjusts the tone.
D.LEVEL
(DIRECT LEVEL)
0–100
Adjusts the volume of the direct sound.
HOLD
OFF, ON
The effect sound is held when you turn
this on.
* Patches are written with the HOLD
parameter set to Off.
