7.
Align the pre-assembled barre end verticals with the now-
assembled horizontals, on each end of the barre (with set
screws facing up):
8.
After visually ensuring they are square, fully tighten the pre-
assembled barre end verticals on each side:
9.
Once the barre end verticals are square and tightened in
place, fully tighten the set screws on the pre-assembled
center support section, in preparation for picking up the
barre:
10.
Place the pre-assembled base stabilizers to the side of each
barre end vertical, making sure they are to the same side of
each vertical:
11.
With the help of an additional adult, lift the assembled
barre upper until it can be placed into the receiving
connectors on the base stabilizers:
12.
Place the assembled barre upper into the receiving
connectors on the base stabilizers. FULLY tighten all set
screws on the entire barre, once you have ensured that all
pieces are square:
ENJOY YOUR EXTENDED BOSS BARRE PRO!
