Page 13
STEP5:
Attach both hoses to the Tractor.
See FIGURE 8.
1. Cut the strap securing the Hoses to the Beam, release both hoses.
2. Remove Protective Caps from the open end of both hoses, screw on the Connectors to both hoses.
NOTE:
Different tractor needs different types and sizes of Tractor Hydraulic Connectors. For this reason, the Splitter
Hoses do not have Connectors on the ends.
. You need to prepare the correct type / size connectors for your
application. The Splitter Hose Threads are 1 / 2” NTP Male.
3. Route the hoses down the underside of the Beam to the rear, and plug the connectors into the Tractor Pump ports.
NOTE:
Refer to your Tractor Owner’s Manual, or tractor supplier before attaching or removing the connectors
to / from tractor pump. If the hoses are attached to the wrong ports of the Tractor Pump, the splitter won’t work
when you operate the control handle lever. Simply swap the hoses to the correct ports.
(FIGURE8)
Connector
Tractor Pump Port
Page 16
Summary of Contents for 3PT22T25
