Boss Industrial 3PT22T25, Owner'S Manual

Page: 16 / 36

Page 9
NOTE:
Due to the weight / size of the log splitter, and needs to coordinate the tractor controls for assembling and set-up
the 3-Point Hitch log splitter to the tractor, it’s recommended that two or more adults be present to assist with the
assembling and set-up.
Get your tractor prepared for assembly:
1. This 3-Point Hitch log splitter is designed for tractors with pressure ratings that are under 3200 PSI ( Category 1 or
Category 2’s power). Review the Tractor Owner’s Manual to make sure your tractor meets the specifications of the 3-
Point Hitch log splitter.
2. Check the three Hitch Pins are available for your log splitter.
3. Different tractor needs different types and sizes of Tractor Hydraulic Connectors. For this reason, the Splitter Hoses do
not have Connectors on the ends. You need to prepare the correct type / size connectors for your application. The
Splitter Hose Threads are 1 / 2” NTP Male.
STEP 1: Insert the U-shape Mounting Bracket Bar into the frame top, secure with the hardware in Hardware Kit # 11. See
FIGURE 4.
REF. NO.
DECSRIPTION QTY.
1 Beam / Frame top assembly 1
2 U-shape mounting bracket bar 1
3 Hardware mounted on U-shape bar
Including:
3-1
Hex head bolt / M12 x 60
2
3-2
Spring washer / M12
2
3-3
Flat washer / M12 2
3-4 Lock nut / M12 2
ASSEMBLY & SET-UP INSTRUCTIONS
(FIGURE 4)
ASSEMBLY AND SET-UP
Page 12