background image

 

 

 

 

 WARNING:  Read and thoroughly understand all instructions in this manual and on safety decals 
before assembling or operating this log splitter. Failure to do so may cause serious injury or death.  
Do not allow anyone to operate this log splitter who has not read this manual. As with all power 
equipment, a log splitter can be dangerous if assembled or used improperly. Do not operate this log 
splitter if you have any questions concerning safe operation. To get answers to any questions, call 
our customer service department at 1-800-780-2677.

 

 

Si no entiende ingles, se prefiere que busque alguien que interprete las instrucciones para usted.

 

 

 
This SAFETY ALERT SYMBOL identifies important safety messages in this manual. 
Failure to follow this important safety information may result in serious injury or death.

 

 

 

 

 

 

 

                                   

DANGER!

 This machine was built to be operated according to the safe operation practices in this  

                                   manual. As with any type of power equipment, carelessness or error on the part of the operator can 
                                   result in serious injury. This machine is capable of amputating hands and feet and throwing debris.  
                                   Failure to observe the following safety instructions could result in serious injury or death. 

 

 

 

 

 

The following signal words and meanings are intended to explain the levels of risk associated with this product. 
 
 

DANGER indicates a hazardous situation which, if not followed, 
will result in serious injury or death.

 

 

WARNING indicates a hazardous situation which, if not avoided, 
could result in serious injury or death.

 

 

CAUTION indicates a hazardous situation which, if not avoided, 
could result in minor or moderate injury.

 

 

NOTICE is important information about the proper use of 
your machine. Failure to follow this instruction could result 
in damage to your machine or property.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Page 1 

 

Summary of Contents for 3PT16T21




























Reviews: