background image

Page 20

 

 

 

 

 

 

     LIMITED WARRANTY STATEMENT

 

Boss Industrial, Inc., (“Boss Industrial”) warrants to the original retail purchaser that this BOSS brand outdoor product is 
free from defect in material and workmanship and agrees to repair or replace, at Boss Industrial’s, discretion, any 

defective product free of charge within these time periods from the date of purchase.

 

 

Two years for all models if used for personal, family, or household use;

 

 

90 days for any unit used for other purposes, such as rental or commercial.

 

This warranty extends to the original retail purchaser only and commences on the date of the original retail purchase

Any part of the this product  manufactured or supplied by Boss Industrial and found in the reasonable judgment of Boss 
Industrial to be defective in material or workmanship will be repaired or replaced without charge for parts and labor by a 

Boss Industrial authorized service center. 

How to process a warranty claim? You must first call the BOSS INDUSTRIAL 

service hotline 1 800 780 2677. Our technical team will guide you in trouble shooting, repairing, or returning a 

defective part or machine. Any unauthorized repair or return without a valid Return Authorization Number from Boss 

Industrial will invalidate this warranty. 

The expense of delivering the product to the dealer for warranty work and the 

expense of returning it back to the owner after repair or replacement will be paid by the owner. Boss Industrial’s 

responsibility in respect to claims is limited to making the required repairs or replacements and no claim of breach of 
warranty shall be cause for cancellation or rescission of the contract of sale of any BOSS brand product. Proof of purchase 

will be required by the dealer to substantiate any warranty claim. All warranty work must be performed by a Boss 

Industrial authorized service center.

 

This warranty is limited to ninety (90) days from the date of original retail purchase for any Boss Industrial brand product 
that is used for rental or commercial purposes, or any other income-producing purpose.

 

This warranty does not cover any BOSS brand product that has been subject to misuse, neglect, negligence, or accident, 

or that has been operated in any way contrary to the operating instructions as specified in this operator’s manual. This 

warranty does not apply to any damage to the product that is the result of improper maintenance or to any product 

that has been altered or modified. The warranty does not extend to repairs made necessary by normal wear or by the 

use of parts or accessories which are either incompatible with the BOSS brand product or adversely affect its 

operation, performance, or durability. In addition, this warranty does not cover:

 

A.  Tune-ups – Spark Plugs, Carburetors, Adjustments, Ignition, Filters

 

B.  Wear items – Tires, nylon liners, rubber seals, hydraulic oil, etc… 
C.  Gas Engines – as they are covered under the Engine Manufacturers’ Warranty.

 

Boss Industrial reserves the  right  to  change  or  improve the  design  of  any BOSS brand  product  without assuming any 

obligation to modify any product previously manufactured.

 

ALL IMPLIED WARRANTIES ARE LIMITED IN DURATION TO THE STATED WARRANTY PERIOD. ACCORDINGLY, ANY  SUCH  
IMPLIED  WARRANTIES INCLUDING MERCHANTABILITY, FITNESS FOR A  PARTICULAR PURPOSE, OR OTHERWISE, ARE 
DISCLAIMED IN THEIR ENTIRETY AFTER THE EXPIRATION OF THE APPROPRIATE TWO-YEAR, ONE-YEAR, OR NINETY-DAY 
WARRANTY PERIOD. BOSS INDUSTRIAL’S OBLIGATION UNDER THIS WARRANTY IS STRICTLY AND EXCLUSIVELY LIMITED TO 
THE REPAIR OR REPLACEMENT OF DEFECTIVE PARTS AND BOSS INDUSTRIAL DOES NOT ASSUME OR AUTHORIZE ANYONE 
TO ASSUME FOR THEM ANY OTHER OBLIGATION. SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN 
IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU. BOSS INDUSTRIAL ASSUMES NO 
RESPONSIBILITY FOR INCIDENTAL, CONSEQUENTIAL, OR OTHER DAMAGES INCLUDING, BUT NOT LIMITED TO, EXPENSE OF 
RETURNING THE PRODUCT TO AN AUTHORIZED BOSS INDUSTRIAL SERVICE CENTER AND EXPENSE OF DELIVERING IT BACK 
TO THE OWNER, MECHANIC’S TRAVEL TIME, TELEPHONE OR TELEGRAM CHARGES, RENTAL OF A LIKE PRODUCT DURING 
THE TIME WARRANTY SERVICE IS BEING PERFORMED, TRAVEL, LOSS OR DAMAGE TO PERSONAL PROPERTY, LOSS OF 
REVENUE, LOSS OF USE OF THE PRODUCT, LOSS OF TIME, OR INCONVENIENCE. SOME STATES DO NOT ALLOW THE 
EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION 
MAY NOT APPLY TO YOU.

 

This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.  This 

warranty applies to all BOSS brand products manufactured by or for Boss Industrial and sold in the United States. 

 

 

WARRANTY 

Page 23

 

 

Summary of Contents for 3PT16T21




























Reviews: