E - 8
16)SOURCE BUTTON (SOURCE)
Press SOURCE button to select a different source of operation as indicated on the display panel.
Available sources include Tuner, CD, MP3/WMA and Aux in .
Press this button to remove the control panel.
7. BASIC OPERATIONS
1) PANEL RELEASE BUTTON
12)POWER ON/OFF BUTTON
Press POWER button or any other button on the front of the radio (except Open/Eject)to turn the
unit on. Press POWER button again to turn the unit off.
2) MUTE BUTTON (MUTE)
Press the mute button momentarily to mute the audio volume, and "Mute" will flash in the
display. Press the mute button again to restore volume to the previous setting.
10)ENCODER VOLUME BUTTON
To increase the volume, rotate the volume control clockwise. To decrease the volume,rotate the
volume control counter clockwise. When volume is adjusted, the volume level will be shown on the
display panel as a number ranging from 0 (lowest) to 46 (highest).
5) AUDIO BUTTON (AUDIO/ENTER/MP3 ENTER)
Press the AUDIO button , the display will be displayed first option is Volume, followed by Subwoofer
(only if the Subwoofer feature is currently activated), Bass( only if EQ5 is currently deactivated), Treble(
only if EQ5 is currently deactivated), Balance, Fader and back to Volume. When adjusting audio
functions, the unit will automatically exit audio control mode after 5 seconds of inactivity.
Subwoofer
Press the volume control twice, then rotate it clockwise or counterclockwise to adjust the
Subwoofer level from 0 to 12.
Bass
Press the volume control three times, then rotate it clockwise or counter clockwise to adjust Bass
from -6 to +6. "0” represents a flat response.
AUX INPUT
Connect the external signal to the RCA line in jack located at the rear of the unit , then press Mode
button to select Aux mode. Press Mode Button again to cancel Aux Mode and return to previous
mode.
Treble
Press the volume control four times, then rotate it clockwise or counter clockwise to adjust Treble
from -6 to +6. "0” represents a flat response.
Press iX-BASS for more than 3 seconds to activate the sub-woofer audio output to an optional
subwoofer amplifier. "Subwoofer On" will appear in the display for 5 seconds, and the SUB-W icon
will appear and remain in the display. Press iX-BASS again for more than 3 seconds to turn the
subwoofer off. "Subwoofer Off" will appear in the display for 5 seconds, and the SUB-W icon will
disappear.
Summary of Contents for MP3-4600R
Page 1: ......