background image

E - 5

4. DETACHABLE CONTROL PANEL (D.C.P.)

Removing The Detachable Control Panel (D.C.P.).

1.  Turn the power off
2.  Press the D.C.P. release button
3.  Remove the D.C.P.

PANEL RELEASE 
BUTTON

B

A

2

Attaching the DCP

CAUTION

1. Attach the panel at the right side first, with 
point B on the main unit touching point A on the 
D.C.P. (As shown on the digram).
2. Then press the left side of D.C.P. onto the main 
unit until a “click” sound is heard.

DO NOT insert the D.C.P from the left side. Doing so may damage it.
The D.C.P can easily be damaged by shocks. After removing it, place it in a protective case and be careful not to drop 
it or subject it to strong shocks.
When the release button is pressed and the D.C.P is unlocked, the car's vibrations may cause it to fall. To prevent 
damage to the D.C.P, always store it in a protective case after detaching it.
The rear connector that connects the main unit and the D.C.P is an extremely important part. Be careful not to 
damage it by pressing on it with fingernails, pens, screwdrivers, etc.  

Note:

If the D.C.P is dirty, wipe off the dirt with soft, 
dry cloth only. And use a cotton swab soaked 
in isopropyl alcohol to clean the socket on the 
back of the D.C.P.

Socket

RE

SE

T

RESETTING THE UNIT:

After releasing the front panel, use a pencil or any non-metalic object to press & hold the 
reset button for five seconds to reset the unit.
Long press the eject button for more than 6 seconds to reset / resume the CD Deck 
mechanism.

Summary of Contents for MP3-4600R























Reviews: