Boss Audio Systems MP3-4600R, User Manual

Page: 13 / 22

E - 12
Manual Tuning
Press the Up Tuning or Down Tuning button for more than 3 seconds to move the radio frequency
number up or down one step.
Auto Seek Tuning
Press the Up Tuning or Down Tuning button for less than 3 seconds to move to next station
automatically.
8. TUNER OPERATION
Recall a Station
Select a band (if needed). Press a preset button to select the corresponding stored station.
14) TUNING UP/DOWN BUTTON ( )
9) SCAN BUTTON(SCAN)
Press SCAN button to scan through strong stations in the current band. The radio pauses for 5
seconds at each strong station. Press SCAN button again to listen to the current station.
7) PRESET STATIONS BUTTONS
Six numbered preset buttons store and recall stations for each band.
Store a Station
Select a band (if needed), then select a station. Hold a preset button for 3 seconds. The preset
number will appear in the display.
Automatically Store
Automatically select 6 strong stations and store them in the current band. Select a band (if
needed). Press AS/PS button for more than three seconds. The new stations replace stations
already stored in that band.
Preset Scan
Scan stations stored in the current band. Select a band (if needed). Press AS/PS button for less
than 3 seconds. The unit will pause for ten seconds at each preset station. Press AS/PS button
again to stop scanning when the desired station is reached.
STEREO
The unit will automatically pick up a stereo signal, when available. When in stereo mode, the ST
icon appears in the display. When no stereo signal is available, the unit will automatically revert to
mono operation, and no icon will be displayed.
11) AUTOMATICALLY STORE / PRESET SCAN (AS/PS/ID3)
13) BAND BUTTON (BAND/MP3 SERACH)
Press BAND to change between FM bands and AM(MW) bands. Each band stores
up to 6 preset stations.
3) LOCAL/DISTANT BUTTON (LOC)
During station tuning, this button allows you prior to access strong local station only (Local mode), or
to access a wider range of using distant mode (DX). When powered on, DX mode will be defaulted
automatically; Press LOC button briefly to select Local mode and “LOCAL” symbol on the LCD will light
up for a few seconds.