1
.
Removing insulating sheet
If using remote control for the first time, you
can see an insulating sheet at the bottom
side of remote control as right.
you must remove the insulating sheet as right.
Otherwise, the remote control is disabled.
2. Replace lithium cell
If the electric energy of lithium cell is weak,
replace it.
1) Press and hold the movable block as direction
indicated by arrow 1 as right, at one time pull
cell holder out of remote control as direction
indicated by arrow 2 as right.
2) Replace the old cell by a new one with (+)
polarity side upward as right.
3) Insert the cell holder into remote control again
as right.
3
.
Note about using remote control
1) You should face the emitting window of remote control towards the sensor
window of the unit.
2) Operation angle for front panel: About 30 degree
3) The distance between the emitting window of remote control and the sensor
window of the unit : < 5M .
4
.
Warning for lithium cells of remote control
1)Cell leakage may cause damage to remote control.
2)Do not throw cells into fire, it may cause explosion.
.
3.To avoid risk of accident, keep cells out of reach of children.
GENERAL KNOWLEDGE ABOUT REMOTE CONTROL
-5-
Summary of Contents for BVI9994
Page 1: ......
