background image

20. Program Playback

     It allows you to enter the order in which you want some chapters/tracks in
     DVD/VCD/MP3/WMA/CD to play.
1   During playback, press the PROG button to enter a program interface as 
     follows:

         for DVD/MP3/WMA                         for VCD/CD

2   Use the direction buttons to move cursor onto the desired place for inputting
     the sequence number.
3   Use the number button to input desired sequence number of title/chapter/
     track with desired sequence.
4   Use the direction button to move cursor onto Play item, then press the OK 
     button to play the programmed titles/chapters/tracks in programmed order;
     only pressing the PLAY button also can play the programmed titles/chapters
     /tracks in programmed order. 
*    To exit program playback, first press the STOP button, then press the PLAY
     button to enter sequence playback; or press the PROG button twice again. 
*    To remove all the programmed sequence numbers, move the cursor onto 
     empty item, then press the OK button.
*    To change the programmed sequence, move the cursor onto the item you
     want to change, input the desired sequence number.
*    During VCD playback, if it is in PBC ON mode, at the same time of entering
     the state of program playback, it turns off PBC mode.   
  

21. Playback IMAGE files  

1.  The root menu is displayed on the monitor when beginning to switch on IMAGE 
     mode. . 
     In the root menu, the left file sort icon is for MP3/WMA file; the middle file sort 
     icon is for JPEG file; the right file sort icon is for VIDEO file. If one of these 3 
     file sort does not exist, you can not move cursor onto the file sort icon.
2.  When displaying the root menu, press the direction buttons to select your 
     desired FOLDER, file or file sort icon, then press the OK or PLAY button to 
     open the FOLDER, or play the selected file, or play only this sort of file.
     When displaying the root menu,  you can also use the number buttons to 
     select the serial number of the file and play the file.
     When you select the JPEG file sort icon, press the ^ or > button to select the 
     first JPEG file, then press the v button to select the desired JPEG file, finally
     press the OK or PLAY/PAUSE button to display the JPEG picture in full screen
     from the selected JPEG picture. 

-21-

Summary of Contents for BVI9994

































Reviews: