10
7
1
2
3
4
4
4
5
5
6
6
8
9
INSTALLATION
PRECAUTIONS
• Choose the mounting location carefully so that the unit will not interfere with the normal driving
functions of the driver.
• Avoid installing the unit where it would be subject to high temperatures, such as from direct sunlight
or hot air from the heater, or where it would be subject to dust, dirt or excessive vibration.
• Use only the supplied mounting hardware for a safe and secure installation.
• Be sure to remove the front panel before installing the unit.
NOTE:
Inclination angle for car radio installation must not exceed 30° otherwise the front panel will not open.
NOTE:
Keep the release key in the safe place as you may need it in future to remove the unit from the car.
TO SUPPORT THE UNIT
Detaching and attaching the front panel
The front panel of this unit can be detached in order to prevent the unit from being stolen.
Before detaching the front panel, be sure to press the
button (1) OFF first.
Then press the
button and detach the panel by pulling it towards you as illustrated.
Notes:
• Do not press the front panel hard against the unit when attaching it. It can be easily attached by
pressing it lightly against the unit.
• When you carry the front panel with you, put it in the supplied front panel case.
• Do not press hard or give excessive pressure to the display window of the front panel when attaching
it to the unit.
Detaching and attaching the display screen
• When the lower part of the front panel (control board) is detached, the unit can be power off.
• Do not press hard or give excessive pressure to the display window of the front panel when attaching
it to the unit.
• Pay attention not to put any pressure on the display or control buttons.
1
B
A
C
2
182mm
53mm
3
4
5
Bend these
claws, if necessay
Release screw and
bracket
1. UNIT
2. RELEASE CASE
3. DASH BOARD
4. HEX NUT
5. LOCK WASHER
6. PLAIN WASHER
7. CAR BODY
8. REAR SUPPORT STRAP
9. TAPPING SCREW
10. M5 X 15 HEX BOLT
Dashboard
