Boss Audio Systems BV2950TU, User Manual

Page: 10 / 28

BV2950TU User ’s Manual - page 8
Preparing and using the remote
control
Battery replacement
* Before using the remote control, please
take the transparent insulator strip off the
bottom of remote control.
-Do not subject the remote control to
excessive shock.
-Do not put in a pocket.
-Keep away from food, moisture and
dirt.
-Do not place in direct sunlight.
The remote control uses a lithium button
type battery, model CR 2025 3V. Do not
use any other kind of battery in the
remote. Follow these instructions when
installing or replace the battery.
* Point the remote control at the remote
sensor (11) from no more than 6 feet
away.
* If the IR sensor is exposed to direct
sunlight, the remote control may not be
able to communicate with it properly. You
may need to relocate or shield the IR
sensor.
* If you are more than 30 away from
being directly in front of the IR sensor,
the remote control may be unable to
communicate properly.
* The remote control is a small,
lightweight precision device. To avoid
damage, short battery life, operational
errors and poor response, observe the
following:
1. Remove the battery holder by
pressing the locking tab with your thumb
and slide the battery holder out.
0
U s i n g T h e R e m o t e C o n t r o l
A
B
3. Closing the cover
Gently push in the holder until it is
securely locked into place.
2. Replacing the battery
Replace the battery with the same type of
battery and the (+) side facing up.