3. WHAT DISPLAY CAN SHOW DURING THE INCOMING/OUTGOING CALL MODE
User can use his / her Mobile Phone
or remote control to dial and make an outgoing call .
Once the user start dialling, the display should show
DIALING
.
The audio output of the present mode will ONLY be muted after pressing the
TALK
button
as a confirmation to dial the outgoing call.
During talking mode, the LCD Display will display talking
time.
To end the conversation, press the CANCEL (SRC )
button
or (STOP) at the Remote
control and the Hang up will showed on display. The unit and the display on the LCD will
switch back to the previous mode automatically. The mute of the previous mode will be
released at the same time.
When there is an incoming call, the display will display the incoming caller telephone
number If the incoming call has no caller number, the LCD will display 00000000 user can
short press the TALK button answer / accept the call and the Talking display will be showed
when the call is answered.
To end the conversation, press the CANCEL(SRC or (STOP) at the Remote control and the
Hang up will showed on display. The unit and the display on the LCD will switch back to the
previous mode automatically.
INCOMING CALL
OUTGOING CALL
INSTRUCTION FOR HANDSFREE FUNCTION
BLUETOOTH MODE OPERATION
1. PAIR IT WITH YOUR PHONE (PAIRING)
Before you use your Car HANDSFREE System, you need to pair it with your mobile phone.
1. The Bluetooth set system on the head unit will automatically go into pairing mode when the
POWER turned on
.
2. Set your Bluetooth phone to discover the CAR_AUDIO_HF.
3. Your phone will find the CAR_AUDIO_HF.
Your phone then asks if you want to pair with it. Accept by pressing Yes or OK on the phone
and confirm with the passkey or PIN=0000 (4 zeros). Your phone will confirm when pairing is
complete.
In case of unsuccessful pairing, repeat steps 1 to 3 .
2. OPERATION
Call Accept: Single click TALK button during an incoming call to accept the call.
Call Reject: Click CANCEL (SRC ) or (STOP) on the remote during an incoming call will
reject the call.
Call End: Single click SRC button when communication or dialling an outgoing call to
hang up.
Call Disconnect: No
BT
mode
Click TALK button about 1.5 seconds when it is not in
communication mode. And Disconnect and
BT OFF
will showed on the display.
Call Re-connect,Click TALK button again at the Disconnect Status. The connection will be
reconnected and CONNECT & BT
ON will
showed on the display.
Call Transfer (Private mode): Click TALK button about 1.5 seconds at communicating time,
transfer the call to phone, click talk button once again, transfer the call to Bluetooth.
Auto Answer (Depend on mobile phone feature): Pls refer to your own mobile phone manual
for handsfree auto answer setting.
Volume Adjust: User can use the volume up/down to adjust the volume level.
E -11
Summary of Contents for 624B
Page 1: ...4...
