9
2.2 Caution on Unpacking and Before Installation
First, follow all the necessary steps of section 2.1 to protect the
HS-6036 from electricity discharge. Refer to section 1.3 to check
the delivery package again with following steps:
1. Unpack the HS-6036, Store well all packing materials, manual
and diskette, etc.
2. Are there any components missing or disconnected from the
board? DO NOT INSTALL IF THIS HAPPENED.
3. Is there any visual damage ob the board? DO NOT INSTALL IF
THIS HAPPENED.
4. Check the optional parts (i.e. CPU, SRAM, DRAM, ROM-Disk
etc.) to completely set all necessary jumpers settings and CMOS
setup correctly. Refer to all information on jumpers setting in this
manual.
5. Check the needed external devices (i.e. Add-On-Card, Driver
Type etc.) to complete add-in or connection and CMOS setup
correctly. Refer to all information of connector connection in this
manual.
6. Keep all necessary manual and diskette in good condition for
re-installation purposes in the future if you change your Operating
System or when need arises.
Summary of Contents for HS-6036
