Framingham, MA 01701-9168
SIZE
A
FSCM
32108
CLASS
RF
DWG NO.
273139
SHEET
19 of 25
REV.
01D
b. Replacement
1. Insert microphone through barrel of the plastic housing. Push replacement
microphone with 2 new o-rings into the barrel of the plastic housing and secure in
place with e-ring.
2. Plug 3-pin connector from the microphone assembly into the mating 3-pin
connector on the cable assembly. Ensure connectors are securely seated.
3. Plug cable connector from the cable/microphone assembly (2) into the jumper
cable (4) coming off the earcup printed circuit board.
4. Using cross-tipped screwdriver, secure cable/microphone assembly (2) to the
earcup assembly (1).
CAUTION
Ensure no wires are pinched
during reassembly of the
cable/microphone assembly to
the earcup assembly.
