Framingham, MA 01701-9168
SIZE
A
FSCM
32108
CLASS
RF
DWG NO.
273139
SHEET
15 of 25
REV.
01D
5.6
Alkaline Battery Removal and Replacement
a.
TTH
Battery Removal and Replacement
1. Using flat-tipped screwdriver, loosen the captive screw on the battery cover and
rotate to open the battery compartment.
2. Remove old battery and insert replacement battery positive end first into the
battery compartment.
3. Close battery cover and tighten screw using flat-tipped screwdriver.
b.
TTH Series 2
Battery Removal and Replacement
1. Using flat-tipped screwdriver, loosen the captive screw on the battery cover and
rotate to open the battery compartment. Battery door is connected to the control
module via a stainless steel tether.
2. Remove old battery and insert replacement battery positive end first into the
battery compartment.
3. Close battery cover by inserting the tab on the battery cover into the slot in the
control module and rotating the battery cover closed.
4. Tighten screw using flat-tipped screwdriver.
Captive screw on
battery cover
+
-
Control Module
Observe Polarity
Captive screw on
battery cover
+
-
Control Module
Observe Polarity
