21
C
OMPLETE
S
YSTEM
C
ONNECTIONS
TAB 5
TAB 4
TAB 6
TAB 8
TAB 7
English
TAB 3
TAB 2
6.
Choose the VS-2 cable and notice the small plug at
one end.
7.
Locate the connector labeled DC POWER Out on
the VS-2 video enhancer.
8.
Insert the gray plug labeled DC Power into this
connector.
Important Note:
The two power cables that plug into
the end of the VS-2 contain antennas for the radio
frequency (RF) remote control.
BE SURE to fully extend both cables and keep them
away from other system cables as much as possible.
Small plug
00.LIV_IG.book Page 21 Monday, January 12, 2009 10:58 AM
